Eventually, we agreed that an ITPS became an elemental swirl if it had more than one layer and maybe a pencil line. (Maybe?)
So, it’s basically a modified ITPS, right?
The original elemental swirl was layered horizontally with pencil lines, and we’re going vertical sans pencil lines today…
So, whatever you want to call this swirl, I present to you yet another rainbow swirled soap.
(I’m partial to double ITPS, personally.)
Either way, I wish I recorded a video of making this soap as explaining the parts and pieces might get a little confusing. Crossing my fingers that everyone follows along!
This is a remix recipe of one of my favorite palm-free recipes, used in the Rainbow Ombre Soap Tutorial. If you don’t have babassu (it is pretty expensive), you can replace the babassu oil with mostly coconut oil and a little shea butter.
It is sized for my Uber Kate mold from Soap Hutch (11″ long by 2.5″ wide by 4″ tall loaf cavity – poured to about 3.5″ depth).
Soap Recipe Used
- 9 ounces Coconut Oil
- 8 ounces Apricot Kernel Oil
- 8 ounces Rice Bran Oil
- 5 ounces Shea Butter
- 5 ounces Babassu Oil
- 3 ounces Castor Oil
- 5.23 ounces Sodium Hydroxide
- 10.62 ounces Distilled Water
I buy most of my soaping oils from Soaper’s Choice (Columbus Foods).
Essential Oil Blend Used
- 12 grams Pink Grapefruit Essential Oil
- 8 grams Lime Essential Oil
- 8 grams 5-Fold Orange Essential Oil
- 6 grams Ylang Ylang III Essential Oil
- 6 grams Litsea Cubeba Essential Oil
- 4 grams Lavender 40/42 Essential Oil
- 4 grams Spanish Rosemary Essential Oil
- 4 grams Dark Patchouli Essential Oil
These essential oils are from Liberty Natural, but you can use any fragrances or essential oils your heart desires.
- 1 tsp Titanium Dioxide (Bramble Berry)
- 1/2 tsp Voodoo Mica (Mad Oils)
- 1/2 tsp Tangerine Mica (The Conservatorie)
- 1/2 tsp Bright Yellow Raincoat Mica (Mad Oils)
- 1/2 tsp Maniacal Pea Mica (Mad Oils)
- 1/2 tsp Blue Kamikaze Mica (The Conservatorie)
- 1/2 tsp Cosmo Martini Mica (The Conservatorie)
PREP WORK: Weigh out your soaping oils. I like to add my essential oils to my main soap pot so I can’t possibly forget them later. Make up your lye solution, too!
I keep my Titanium Dioxide premixed and diluted, so I can easily add it to my soap. If you don’t, you’ll want to prep your TD. In six separate measuring cups, I measured out the individual colors and a small amount of oils from the main batch of oils.
GET STARTED: Add your lye solution to your soaping oils.
Stick blend until barely emulsified, and then split the batch into two halves. Let’s call them Half One and Half Two.
Split a quarter of Half One into the measuring cups containing the Pink, Orange, and Yellow dispersed micas. Thoroughly mix the raw soap into the pink, orange, and yellow containers.
Split a quarter of Half Two into the measuring cups containing the Green, Blue, and Purple dispersed micas. Thoroughly mix the raw soap into the green, blue, and purple containers.
Once you have split off the soap for the rainbow micas, add 1/2 teaspoon of Titanium Dioxide to Half One and Half Two. I used a stickblender (lightly!) to quickly mix in my Titanium Dioxide, which made the white soap a little thicker. This was what I was going for, so the weight of the white soap would create thinner veins of rainbow swirls. 😉
PREP THE SWIRL: You should now have two measuring cups with a LOT of white soap (Half One and Half Two), and six measuring cups with tiny bits of each rainbow color (Pink, Orange, Yellow, Green, Blue, Purple). Perfection!
Next, we’re going to use the rainbow of raw soap to add in-the-pot-swirls to the soap colored with Titanium Dioxide.
In Half One, add the Pink, Orange, and Yellow soap around the outside of the measuring cup, and a stacked funnel pour down the center. You can just pour it in there randomly, but I like to make sure I can see all the colors added to ensure I don’t forget one! If you want to mimic the swirl I did on the top, reserve a tiny bit of the Pink, Orange, and Yellow soap (about a tablespoon of each.)
Repeat the process with Half Two, with the Green, Blue, and Purple soap.
POUR IT: Now it’s time for Half One and Half Two to meet once again!
I used a divider down the length of my mold in the center, which gives the two even sides you see in the finished rainbow double ITPS/elemental swirl soap and mimics a pencil line down the center as it drags color up through the center. You can skip the divider for a different take on this swirl!
Pour Half One and Half Two into the mold at the same time. I move my measuring cups down the length of the mold as I pour, if you pour into one place you will get a different effect.
After pouring both halves of soap into the mold, remove your divider.
FINISH IT UP: Finish the top as you please! For this particular rainbow double ITPS/elemental swirl soap batch, I used the remainder of each color and poured it down the length of the mold. After lining it all up, I swirled it with a chopstick.
Spritz the top with rubbing alcohol when it loses the sheen of wet soap, and cover with plastic wrap to help keep the ash monsters away.
Remove the soap from the mold, slice it up, and give it a good cure. Enjoy!
This rainbow dual elemental swirl or double in-the-pot-swirl soap recipe featured in this tutorial is a palm-free and vegan friendly formula. It uses a 7% superfat and a 33% lye solution strength. Feel free to adjust as necessary!